Table of Contents
Advertisement
Technical Specifi cations Manual
Product Information
Save these instructions for future use. Use the form below to record your model and serial number for future
reference.
Date Purchased
Purchased From
Installed By
Serial Number
Model
Installer: Leave the manual for the homeowner.
Homeowner: Read this manual and keep for future reference.
Technical Specifi cations
Read complete instructions before beginning installation.
Each bathtub arrives ready for installation, completely equipped with blower motor, pump/motor assembly, heater, and
plumbing necessary for operation.
Remove the bathtub from the carton. Retain the shipping carton until satisfactory inspection of the product has been
made. Do not lift the bathtub by the plumbing or wiring at any time; handle by the shell only.
Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in the
fi nish, do not install the bathtub. Damage or defect to the fi nish claimed after the bathtub is installed is excluded from
the warranty.
Jacuzzi Luxury Bath's responsibility for shipping damage ceases upon delivery of the products in good order to the
carrier. Refer any claims for damage to the carrier. For defi nitions of warranty coverage and limitations, refer to the
published warranty information packed with the product.
All bathtub units are factory tested for proper operation and watertight connections prior to shipping.
Prior to installation, the bathtub must be fi lled with water and operated to check for leaks that may have resulted
from shipping damage or mishandling. Jacuzzi Luxury Bath is not responsible for any defect that could have
been discovered, repaired, or avoided by following this inspection and testing procedure.
Technical Specifi cations
www.jacuzzi.com
Page 3
Hide quick links:
Advertisement
Table of Contents
