Adjusting the Beverage Cup Length
The machine allows you to adjust the amount of brewed coff ee according
to your taste and the size of your cups.
Each time the "
", "
" or "
pre-set amount of beverage. Each button may be individually programmed
for a specifi c brew setting.
The following procedure describes how to program the "
1
Place a cup under the dispensing spout.
2
Check the position of the selection lever.
3
Press and hold the "
the display, then release the button. The machine has now entered
programming mode.
The machine starts brewing coff ee.
4
Press the "
" button as soon as the desired amount of coff ee is
reached.
Now the "
" button is programmed; each time it is pressed, the machine
will brew the same amount of espresso that was just programmed.
Note:
To program the other two "
be followed. You should always use the "
coff ee when the desired amount of coff ee is reached even when you are
programming the other two "
" button is pressed, the machine brews a
" button until the "MEMO" icon appears on
" or "
" beverages, the same steps should
" button to stop brewing
"or "
" beverages.
ENGLISH
21
21
" button.