HP 3500 series Specifications page 42

QuickSpecs
Accessory Product Details
HP X112 100M SFP LC BX-D
Transceiver (J9099B)
A small form-factor
pluggable (SFP) 100-
Megabit BX (bi-directional)
"downstream" transceiver
that provides 100 Mbps
full-duplex connectivity up
to 10 km on one strand of
singlemode fiber. The
J9099B connects to the
J9100B "upstream"
transceiver, or to any IEEE-
standard 100BASE-BX10-U
("upstream") device.
HP X112 100M SFP LC BX-U
Transceiver (J9100B)
A small form-factor
pluggable (SFP) 100-
Megabit BX (bi-directional)
"upstream" transceiver
that provides 100 Mbps
full-duplex connectivity up
to 10 km on one strand of
singlemode fiber. The
J9100B connects to the
J9099B "downstream"
transceiver, or to any IEEE-
standard 100BASE-BX10-D
("downstream")
device.
Ports
Physical characteristics
Environment
Cabling
Notes
Services
Ports
Physical characteristics
Environment
Cabling
DA - 13282 North America — Version 20 — January 17, 2014
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D); Duplex: full
only
Dimensions
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE-
standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can
only connect to a 100-BX-U product. You cannot connect two 100-BX-D
transceivers together.)
Refer to the HP website at www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex: full
only
Dimensions
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
HP 3500 and 3500 yl Switch Series
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)
0.04 lb. (0.03 kg)
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, noncondensing
-40ºF to 185ºF (-40ºC to 85ºC)
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)
0.07 lb. (.03 kg)
32ºF to 158ºF (0ºC to 70ºC)
0% to 95%, noncondensing
-40ºF to 185ºF (-40ºC to 85ºC)
for details on
Page 42