Using The Radio Data System (Rds); Timer And Sleep Operation (Remote Control Only) - Sharp XL-HF202PH Operation Manual

Using the Radio Data System (RDS) (continued)
4
While the selected programme type is flashing
(within 6 seconds), press the RDS PTY button
again.
After the selected programme type has been lit for 2 sec-
onds, "SEARCH" will appear, and the search operation will
start.
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about 8 sec-
onds, and then the station name will remain lit.
● If you want to listen to the same programme type of
another station, press the RDS PTY button while the
channel number or station name is flashing. The unit
will look for the next station.
● If no station can be found, "NOT FOUND" will appear
for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, "TP"
will appear.
(This does not mean that you can listen to the traffic infor-
mation at that time.)
When the traffic information is broadcast, "TA" will appear.

Timer and sleep operation (Remote control only)

Timer playback:
The unit turns on and plays the desired source (CD, TUN-
ER, USB, iPod, AUDIO IN, LINE IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer (" " indicator):
Once timer play works for one time only at a preset time.
Daily timer ("DAILY" indicator):
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio pro-
gramme, and use the daily timer to wake up.
1
Set the daily and once timer (pages 17 - 18).
1 minute or more
Daily timer
Start Stop
Once timer
Start Stop
E-17
Descriptions of the PTY (Programme Type) codes, TP
(Traffic Programme) and TA (Traffic Announcement)
NEWS POP M
AFFAIRS ROCK M
INFO EASY M
SPORT LIGHT M
EDUCATE CLASSICS
DRAMA OTHER M
CULTURE WEATHER
SCIENCE FINANCE
VARIED CHILDREN
■ Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer
to page 6). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs or dock
iPod to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press and hold the CLOCK/TIMER button.
3
Within 10 seconds, press the
"Once" or "Daily", and press the ENTER button.
4
Within 10 seconds, press the
"Timer Set", and press the ENTER button.
5
To select the timer playback source (CD, TUNER,
USB, iPod, AUDIO IN, LINE IN), press the
button. Press the ENTER button.
When you select the tuner, select a station by pressing
the or button, and then press the ENTER but-
ton. If a station has not been programmed, "No Preset"
will be displayed and timer setting will be cancelled.
6
To adjust the day, press the
press the ENTER button.
7
Press the ENTER button to adjust the hour. Press the
or button and then press the ENTER button.
8
To adjust the minutes, press the
then press the ENTER button.
9
Set the time to finish as in steps 7 and 8 above.
10
Adjust the volume using the VOLUME control, and then
press the ENTER button.
SOCIAL FOLK M
RELIGION DOCUMENT
PHONE IN TEST
TRAVEL ALARM
LEISURE NONE
JAZZ TP
COUNTRY TA
NATION M
OLDIES
or button to select
or button to select
or
or button and then
or button and