TP-Link M5350 User Manual page 44

5) The following Internet Protocol (TCP/IP) Properties window will display and the IP
Address tab is open on this window by default.
You have two ways to configure the TCP/IP protocol below:
 Setting IP address automatically
Select Obtain an IP address automatically, Choose Obtain DNS server address
automatically, as shown in the Figure below:
 Setting IP address manually
a. Select Use the following IP address radio button. And the following items available
b. If the Device's LAN IP address is 192.168.0.1, type IP address is 192.168.0.x (x is
from 2 to 254), and Subnet mask is 255.255.255.0.
c. Type the Device‟s LAN IP address (the default IP is 192.168.0.1) into the Default
gateway field.
d. Select Use the following DNS server addresses radio button. In the Preferred DNS
Server field you can type the DNS server IP address, which has been provided by
your ISP.
M5350
Figure B-0-3
-37-
3G Mobile Wi-Fi User Guide