Pyle PPDLC1 Instructions

SUPER CHORUS EFFECT PEDAL
PPDLCI
INSTRUCTIONS
FEATURES
The PPDLC I is an effect unit that produces two voices from
a single voice to produce a full, rich chorus effect. this effect
actually sounds like multiple instruments , without a doubt,
the most popular effect on today's market.
~PEC I EI CAI!QNS
PPDLCl: Super Chorus
Input Impedance : 1M
Q
7
Output Impedance : Over 10k
Q
Power Supply: 9 V DC :
Dry Battery 9 V type ( 6F22/9V) ,
4
ACAdaptor .
Current Draw: 14 rnA ( 9V DC )
OPERATION
I. SPEED Knob
3
The actual speed ofthe chorus is determined by this control.
Effect is increased when control is turned clockwise and
decreased when turned counterclockwise.
2. DEPTH knob
This width contro l gives an intensive sound to the chorus
effect as the control is increased. Effect is increased
when turned clockwise and decreased when turned
counterclockwise.
3. EFF.LEVEL knob
The effect level control adjust the output level.
4. Output Jack
The output jacks are used to connect the unit to amplifiers
or other devices.
5. AC Adaptor Jack
Accepts connection of an AC Adaptor. By using an AC
Adaptor, you can play without being concerned about how
much battery power you bave left .
6. Input Jack
Thi s jack accepts input signals (coming from a guitar,
some other electric or electronic musical instrument , or
another effects unit)
7. Check Indicator
This indicator shows whether an effect is ON/OFF , and
also doubles as the Battery Check indicator .The indicator
lights when an effect is ON . If this indicator goes dim or
no longer lights while an effect is ON , the battery is near
exhaustion and should be replaced immediately.
8. Pedal Switch
Thi s Switch turns the effects ON/OFF.
9. Battery Housing
9 V Battery is be placing inside it .
www.PyleAudio.com