Advertisement
Quick Links
PRT15I
Installation
1. Connect the telephone handset cord to the handset jack
2. Connect the telephone line cord to the line cord jack
3. Connect the other telephone line cord to the telephone wall socket
4. Adjust the desired level (L/H) of the ringer signal with the switch on the under side
of the telephone (see pictures below)
Owners Manual
PRT15I
PRT25I
PRT55I
PRT25I
PRT55I
Advertisement
Related Manuals for Pyle PRT55I
Summary of Contents for Pyle PRT55I
- Page 1 Owners Manual PRT15I PRT25I PRT55I PRT15I PRT25I PRT55I Installation 1. Connect the telephone handset cord to the handset jack 2. Connect the telephone line cord to the line cord jack 3. Connect the other telephone line cord to the telephone wall socket 4.
- Page 2 How To Use 1. Tone/Pulse switch On the bottom of telephone base is the P/T switchable dialer. If you have touch tone service then slide the switch to the T(Tone)position; if you have rotary dial service then slide the switch to the P(Pulse) position. 2.Making and Answering Calls To get a dial tone or answer an incoming call, lift the handset.
- Page 3 Parts Included Your new telephone includes the following items 1-Telephone Body 1-Telephone handset 1-Handset coil cord 1-Line cord 1-Owners manual 1-3.5mm jack cable 1-Warranty card Care and Maintenance Use soft and dry cloth to clean the telephone, use polish for wood for polishing the wooden parts 1.