Pc Health Status - Foxconn P55MX Series User Manual

PC Health Status

Warning Temperature
Shutdown Temperature
CPU Temperature
System Temperature
CPU Fan Speed
System Fan1 Speed
System Fan2 Speed
CPU Core
DRAM Voltage
+3.30V
+5.00V
+12.0V
CPU Smart Fan Control
System Smart Fan1 Control
System Smart Fan2 Control
↑↓←→:Move
► Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU/System Fan1 Speed/System Fan2 Speed
The CPU/System fan speed are automatically detected and displayed by the system.
► CPU Core/DRAM Voltage/+3.30V/+5.00V/+12.0V
The current voltages are automatically detected and displayed by the system.
► CPU Smart Fan/System Smart Fan1/ System Smart Fan2 Control
This option is used to enable or disable smart fan function.
The following 4 settings are valid only when Smart Fan Control is set to [Enabled].
► Fan OFF Temperature
It allows you set a temperature value from which smart fan stops its operation.
► PWM Start Temperature
It allows you set a temperature value from which smart fan starts its operation.
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
speed.
► Slope PWM Value
The slope controls the PWM value being stepped up or down versus temperature changes.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Enter:Select
F1:General Help
PC Health Status
[Disabled]
[Disabled]
[Disabled]
o o
:38 C/100 F
o o
:22 C/71 F
Disabled
o
:3552 RPM 50
o
:N/A 55
o
:N/A 60
o
65
o
:1.072 V 70
o
:1.600 V 75
o
:3.360 V 80
:4.972 V
o
85
:11.840V
[Disabled]
[Disabled]
[Disabled]
+/-/:Value F10:Save
F9:Optimized Defaults
37
Help Item
Options
o
C/122 F
o
C/131 F
C/140
o
F
C/149
o
F
o
C/158 F
o
C/167 F
o
C/176 F
o
C/185 F
ESC:Exit