Foxconn P45AL Series User Manual page 36

► Run Setup Over Clock
This setting is used to detect a CPU clock value which can be run in your overcolck system
without risk. Select [OK], and press [Enter], then BIOS will increase CPU clock step by step,
drive the system to its maximal speed until it can not drive any more and restarts itself. During
the process, you can press [q] or [Q] to stop it.
When the overclock test is running, you must always remember the current CPU clock value
on the screen. When the maximal clock value is reached, system will restart itself, and a
message displays :
System recovers from Setup Over Clock
Press F1 to Resume
You can then press [F1] to continue, press [Del] to enter BIOS again, and select "O.C.
Configuration" menu, enter an appropriate CPU clock value (smaller than the latest CPU clock
value shown on the screen before your PC restarts ) in "CPU Clock" option, and start running
your overclock system.
29