Integrated Peripherals - Foxconn P31A-S User Manual

Chapter 2 BIOS Description
3.1 CPU Feature
You can press <Enter> to set the items of CPU feature.
3.2 Hard Disk Boot Priority
This option is used to select the priority for HDD startup. After pressing
<Enter>, you can select the HDD using the Up/Down arrow keys, and change
the HDD priority using <+>/<-> or <PageUp>/<PageDn> keys ; you can exit
this menu by pressing <Esc>.
3.3 Hyper-Threading Technology
This option is used to enable or disable Hyper-Threading technology.
3.4 First/Second/Third Boot Device
This option allows you to set the boot device's sequence.
3.5 Boot Other Device
W hile enabled, the system will boot from some other devices if the first/
second/third boot devices failed.
3.6 Boot Up Floppy Seek
This option controls whether the BIOS checks for a floppy drive while booting
up. If it cannot detect one (either due to improper configuration or physical
unavailability), it will appear an error message.
3.7 Boot Up NumLock Status
This item allows you to select the power-on status for the NumLock. The
available setting values are: On and Off.
3.8 Full Screen Logo Show
This option allows you to enable or disable the full screen logo.
3.9 Small Logo (EPA) Show
This item allows you to enable or disable the EPA logo.

4.Integrated Peripherals

4.1 OnChip IDE Device
This sub-menu is used for the configuration of IDE devices. You can press
26
Integrated Peripherals Menu