Back Panel - GE VG2053/VG4053 User Manual

References
Location of Controls

Back Panel

CH3 CH4 Switch
Selects the channel to which you tune the TV to
see the VCR picture if you connect the VCR
using one of the basic hookups.
ANT (Antenna) IN Connector
Receives a signal from an antenna or cable
system when attached.
RF OUT Connector
Passes signal to TV using the cable supplied.
VIDEO
AUDIO
IN
OUT
CH 3
ANT IN
RF OUT
CH 4
VIDEO IN and AUDIO IN Jacks
Receives signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use INPUT on the remote to select.
VIDEO OUT and AUDIO OUT Jacks
Sends signals from VCR to another component like
a VCR or camcorder when it is connected to these
jacks.
23