Cisco TelePresence System Codec C40 Reference Manual page 202

Cisco TelePresence System Codec C40/C60
Contents Introduction
xStatus SystemUnit Hardware BootSoftware
Shows the version of the boot software that is installed on the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware BootSoftware
*s SystemUnit Hardware BootSoftware: "U-Boot 2010.04-30"
** end
xStatus SystemUnit Hardware MonitoringSoftware
The feedback shows the monitoring software id.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware MonitoringSoftware
*s SystemUnit Hardware MonitoringSoftware: "39"
** end
xStatus SystemUnit Hardware Monitoring Fan [n] Status
The feedback shows the speed (rpm) for the specified fan.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware Monitoring Fan 1 Status
*s SystemUnit Hardware Monitoring Fan 1 Status: "locked on 1096 rpm"
** end
xStatus SystemUnit Hardware Temperature
The feedback shows the current maximum temperature (degree Celsius) measured in the codec/
system.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware Temperature
*s SystemUnit Hardware Temperature: "64.0"
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration
xStatus SystemUnit Hardware TemperatureThreshold
xStatus SystemUnit State System
xStatus SystemUnit State MaxNumberOfCalls
202
xCommand
Returns information on the maximum temperature for the codec. If this temperature is exceeded the
system automatically shuts down.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Hardware TemperatureThreshold
*s SystemUnit Hardware TemperatureThreshold: "85"
** end
Shows what state the system is in.
InCall: The system is in a call.
Initialized: The system is ready for use.
Initializing: The system is initializing.
Multisite: The system is in a Multisite conference.
Sleeping: The system is in sleep mode.
Value space of the result returned:
<InCall/Initialized/Initializing/Multisite/Sleeping>
Example:
xStatus SystemUnit State System
*s SystemUnit State System: Initialized
** end
Shows the the maximum number of simultaneous calls.
Value space of the result returned:
<0..5>
Example:
xStatus SystemUnit State MaxNumberOfCalls
*s SystemUnit State MaxNumberOfCalls: 3
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.