Cisco 892Fsp, Cisco 896Va, Cisco 897Va, And Cisco 898Ea - Cisco 880 Series Hardware Installation Manual

Cisco 890 Series ISRs
4
5
6
1. The Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected
2. The Data BRI port is available only on the Cisco 892 router models.
3. The V.92 port (not shown) is available only on the Cisco 891 router models and is located between the console port and the
Figure 1-34
Figure 1-34
1

Cisco 892FSP, Cisco 896VA, Cisco 897VA, and Cisco 898EA

The Cisco 892FSP, 896VA, 897VA (897VA, 897VAM, 897VAW, 897VAMW), and 898EA routers have
the following features:
•
•
•
•
•
•
•
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-32
Auxiliary port
Console port
8-port 10/100 Ethernet switch
to ethernet ports 0 through 3. If this feature was not configured with the factory order you must order and install it to enable
the PoE function.
Ethernet switch.
shows the location of the SFP port in a Cisco 892F-W router.
SFP Port Location in a Cisco 892F-W Router
1
SFP port
Integrated 8-port 10/100/1000 Gigabit Ethernet (GE) switch for connecting to the LAN
Two 10/100/1000 GE ports for the Cisco 892FSP
One 10/100/1000 GE port for the Cisco 896VA, 897VA, and the Cisco 898EA. Either the SFP socket
or the 10/100/1000 GE port can be active at a given time, but not both.
Single console and auxiliary ports for configuration and management
512 MB of on-board memory (upgrade option to 1 GB)
256 MB flash memory for the Cisco 896VA, 897VA, and Cisco 898EA
One USB 2.0 port
10 Earth ground connection
11 Kensington security slot
SFP
EN
S
2
2 SFP LEDs
Chapter 1 Product Overview
Cisco 892F-W
OL-16215-12