Health; Case Open Warning; Cpu Temperature; System Temperature - Foxconn H61A Series User Manual

► Resume by RTC
This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.
enerate a wake up.
► Energy-using Products
This item is used to enable/disable the EuP(Energy-using Products) feature. When enable, the
suspend power of the chipset will be cut off in S5 suspend mode in order to reduce the power
consumption of motherboard.
Enabled: S1/S3/S4 is normal, S5 wake up only by pressing the power button.
Disabled: Normal ACPI function.
► Restore AC Power Loss
This item is used to set which state the PC will take with when it resumes after an AC power
loss.

Health

Main Advanced Chipset Boot Power Health Security Save & Exit
Case Open Warning
CPU Temperature
System Temperature
CPU Fan Speed
System Fan Speed
CPU Vcore
DRAM Voltage
+12V SYS
+5V SYS
VBAT
CPU Shutdown Temperature [Disabled]
CPU Warning Temperature [Disabled]
Smart Fan Function [Disabled]

► Case Open Warning

This item is used to enable or disable case open warning function.

► CPU Temperature

These items show the current CPU temperature detected automatically by the system.

► System Temperature

These items show the current System temperature detected automatically by the system.
► CPU Fan Speed
This item shows the current CPU Fan speed detected automatically by the system.

► System Fan Speed

This item shows the current North Bridge Fan speed detected automatically by the system.
► CPU Vcore/DRAM Voltage/+12V SYS/+5V SYS/VBAT
These items show the Current CPU Ccore/DRAM/+12V SYS/+5V SYS/VBAt voltage detected
automatically by the system.
Aptio Setup Utility - C opyright (C) 2011 American Megatrends, Inc.
Health
[Disabled]
: +49 C
: +29 C
: N/A
: 4470 RPM
: +1.092 V
: +1.476 V
: +11.661 V
: +5.060 V
: +3.168 V
Version 2.02.1205. Copyright (C) 2011 American Megatrends, Inc.
Enabled Case Open Warning and
open chassis, Intrusion Alarm
will appear. If don't enter
bios setup and disabled Case
Open Warning one time, Intru-
sion Alarm don't clear, it will
appear all the time.
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
35