Smart Bios - Foxconn G31MV-K User Manual

Smart bIoS

Smart Boot Menu
Smart Power LED
Current CPU Speed
Current FSB Speed
Current CPU Multiplier
Current DRAM Speed
↑↓→←:Move Enter:Select
► Smart Boot Menu
When PC starts, if [Enabled] is selected, a Boot Menu will be automatically displayed to inform
you to select a boot device. If no device is selected, the first device will be used. If [Disabled] is
selected, then PC will ask you to press [Esc] key to get into Boot Menu. This setting simplifies
multiple boot devices user from pressing [Esc] key to enter boot menu.
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On System Test (POST). The LED is located at the front panel, and it displays POST
state by different long-short blinking intervals. You can always leave this state enabled.
System Status
Normal
No Memory
No Display
Post Error Message
No CPU Fan
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB Speed
This item displays the current Front Side Bus speed.
► Current CPU Multiplier
This item displays the current CPU Ratio.
► Current DRAM Speed
This item displays the current DRAM speed.
Phoenix - AwardBIOS CMOS Setup Utility
Smart BIOS
[Disabled]
Disabled
[Enabled]
1866MHz
1066MHz
7
800MHz
+/-/PU/PD:Value F10:Save
F5: Previous Values
Power LED Status
Always On
Continue blinking On (1sec.), Off (1sec.)
Continue blinking On (2sec.), Off (2sec.)
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Continue blinking On (1/2sec.), Off (1/2sec.)
25
Item Help
Menu Level
Smart Boot menu with a
timer to let user to
control boot device
easily
ESC:Exit F1:General Help
F7: Optimized Defaults
Stop Blinking Condition
Always On
Reboot & Memory OK
Reboot & Display OK
Enter Setup or Skip
Reboot & Fan OK
►