Smart Bios - Foxconn A7VA Series User Manual

Smart bIoS

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Smart Power LED
Smart Boot Menu Smart Boot Menu
Current CPU Speed
Current FSB/HTT Speed : 2000MHz
Current FSB Multiplier
Current DRAM Speed
↑↓←→:Move
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On Self Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
System Status
Normal
No Memory
No Display
Post Error Message
No CPU Fan
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also pre-
vents user without password trying to get into your computer through smart boot menu.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB/HTT Speed
This item displays the current Front Side Bus speed.
► Current FSB Multiplier
This item displays the current CPU Ratio.
► Current DRAM Speed
This item displays the current DRAM speed.
Power LED
: 2500MH�� 2500MH�� 2500MH��
: 12.5x
: 400 MH��
Enter:Select
F1:General Help
Power LED Status
Always On
Continue blinking On (1sec.), Off (1sec.)
Continue blinking On (2sec.), Off (2sec.)
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Continue blinking On (1/2sec.), Off (1/2sec.)
Smart BIOS
[Disabled] [Disabled] [Disabled] [Disabled]
[Enabled] [Enabled]
Disabled Disabled Disabled
Enabled
+/-/:Value F10:Save
F9:Optimized Defaults
26
Help Item Help Item Help Item
Options
ESC:Exit
Stop Blinking Condition
Always On
Reboot & Memory OK
Reboot & Display OK
Enter Setup or Skip
Reboot & Fan OK