Serial Port 0 Configuration; Device Settings - Foxconn A75M Series User Manual

Super IO Configuration
Advanced
Super IO Configuration
Super IO Chip
▶ Serial Port 0 Configuration
▶ Parallel Port Configuration
▶ CIR Contrller Configuration
► Serial Port 0 Configuration/Parallel Port Configuration/CIR Controller Configuration
Press <Enter> to go to relative

Serial Port 0 Configuration

Advanced
Serial Port 0 Configuration
Setial Port
Device Settings IO=3F8h; IRQ=4
Change settings
► Serial Port
This item is used to enable or disable the serial port (COM).

► Device Settings

This item shows the resource assigned to the serial port.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
IT8728
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
submenu.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
[Enabled]
[Auto]
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Set Parameters of CIR
Controller(CIR)
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Enable or Disable Serial
Port(COM)
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
32