Display; Xec Dls Control; Location & Security; Use Wireless Networks - Philips GoGear SA3CNT08 User Manual

Display

In Display, select your display settings:
Brightness Drag the slider to change the
display brightness.
Switch on/ off the screen rotation
rotate
between the landscape and
screen portrait views.
Animation Select whether to show animation
when you open or close screens.
Screen After the selected time
timeout
duration, the screen switches
off automatically. To save battery
power, select a low value.

XEC DLS Control

With eXtreme Energy Conservation Dynamic
Luminance Scaling (XEC DLS), the display
brightness of Connect can be adjusted
automatically to save power.
Tap XEC DLS Control to select your
options.
The G sensor allows you to switch between the
landscape and portrait views on the Connect.
With the G sensor calibrated, Connect can
precisely response to the screen rotation, and
switch between the landscape and portrait
views.
1
Tap
calibration.
2
Follow onscreen instructions to complete
calibration.
to start
Location & security

Use wireless networks

In Location & security, switch on or off
Use wireless networks.
» If the function is enabled, the tick box
is selected.
» You can allow or disallow your
*location information to be used
in online location services, such as
Maps, or other relevant services and
applications.
Tip
*The location information is based on the IP address

Set up screen unlock

By default, to unlock the screen of Connect,
press / and then, drag the slider to open
the lock.
In Set up screen lock, you can set a pattern, pin,
or password as the unlock security. To unlock
the screen, such unlock security is required.
None
no unlock security is required.
Pattern
Set a pattern as the unlock
security.
PIN
Set a PIN that consists of
numbers.
Password Set a password that consists of a
combination of numbers, letters,
and symbols.

Visible password

Your password consists of several characters. To
make sure that you have entered the characters
correctly, show the characters as you type the
password. Switch Visible password on or off as
needed.
Tap the tick box.
» If the function is enabled, the tick box
is selected.
EN
59