Selecting A Focus Mode - Casio Exilim EX-ZR800 User Manual

Selecting a Focus Mode (Focus)
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the
then press [SET].
3.
Use [8] and [2] to select the setting you want and then press [SET].
REC Screen
Settings
Icon Display
Q AF
(Auto None
Focus)
´
Macro
W MF
(Manual
Focus)
*1
The focus range is the distance from the lens surface.
*2
The focus range depends on the current optical zoom position.
*3
During High Speed Movie recording, focus is fixed at the position where it was
when recording started. To focus an image, half-press the shutter button for Auto
Focus or focus manually before you press [0] (Movie) to start recording.
To focus with manual focus
1.
On the monitor screen, compose the image so
the subject you want to focus on is within the
yellow boundary.
2.
Watching the image on the monitor screen use
[4] (nearer) and [6] (further) to adjust focus.
• At this time the image that is within the boundary
will enlarge and fill the monitor screen, which aids
in focusing. If you do not perform any operation for
two seconds while the enlarged image is displayed,
the screen in step 1 will re-appear.
• When the "Control Dial" (page 96) is set to "MF" (Manual Focus), you can use
the control dial for focusing.
(Focus) Control Panel option, and
Type of Shot
Snapshot
General
recording
Automatic Automatic
Close ups
When you
want to focus
manually
42
Focus Mode Approximate Focus Range
Movies
4 cm to 9 (infinity)
(1.6" to 9) (Wide Angle)
*
3
4 cm to 50 cm
(1.6" to 19.7")
(Wide Angle)
4 cm to 9 (infinity)
Manual
(1.6" to 9) (Wide Angle)
Snapshot Movies
*
2
Yellow boundary
Snapshot Tutorial
*
1
*
2
*
2