Table of Contents
Advertisement
NetDVR.book Page 34 Wednesday, May 12, 2004 4:06 PM
NetDVR | User's Guide | Monitoring
4.2.3 Quick recording
When monitoring real-time images, you can
record specific images to the PC's hard disk.
To record from the Live Viewer:
•
Click on the red 'Rec' button (or press
'Ctrl'+S).
•
A dialogue box opens that provide
information about the recording.
•
The Quick recording process ends
automatically after 5 minutes (unless user
stops it earlier by clicking on the 'Stop'
button).
•
After the recording process is finished
completely, the user is prompted to enter a
file name and directory to save on the PC's disk.
Note:
When the Quick recording process finishes normally, the Playback program is automatically started for
immediate replay of the file. If the Playback Viewer is already open, a second Playback Viewer will be started.
4.2.4 PTZ functions
A user authorized for PTZ may control the
Pan/tilt/zoom functions. To do so:
•
Place mouse cursor over the image.
•
A dotted cross line appears on the center
with control bars on each side of the image.
•
Zoom & Focus: Move the mouse pointer to
the right or left and slide-bars appear in the
screen. The left bar controls the Zoom (Z)
and the right bar controls the Focus (F).
Note:
The focus function will only have effect when the function is available and enabled in the PTZ unit.
•
Pan & Tilt: To control pan/tilt function, click the right hand mouse button on the image.
Place the mouse pointer on the side of the image where the PTZ unit has to move to and
click the right hand mouse button to initiate pan and/or tilt movement.
Note:
Moving the cursor further away from the center of the image makes pan and tilt operate faster, when that
function is supported by the PTZ unit.
Bosch Security Systems | 2004-01
34
Advertisement
Table of Contents
