Configuring 802.1X With Enervista Secure Web Management; Software; Commands - GE MultiLink ML1600 Instruction Manual

CHAPTER 7: ACCESS USING RADIUS
7.3 Configuring 802.1x with EnerVista Secure Web Management Software
7.3.1

Commands

MULTILINK ML1600 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
CONFIGURING 802.1X WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE
To access the 802.1x configuration window,
Select the Configuration > Radius > Server menu item.
Select the server.
Do not enable RADIUS capabilities until you have ensured that the
ports are configured properly.
After the ports are configured, enable RADIUS.
Ensure that the port connected to the RADIUS server, or the
network where the RADIUS server is connected to, is not an
authenticated port.
The following window shows the configuration of a RADIUS Server. Initially, the RADIUS
Services are disabled and the server IP address is set to 0.0.0.0.
Edit the server IP and secret to add a RADIUS server.
7–9