Page 1
VIDOS Monitor Wall Installation and Operating Manual...
Page 3
Copyright This document is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. No part of this document may be reproduced or transmitted for any purpose, by whatever means, electronic or mechanical, without the express written permission of Bosch Security Systems.
EN | 3 Introduction About this manual This section is intended for persons who will set up the VIDOS Monitor Wall program. The manual describes how to set up and start using VIDOS Monitor Wall. VIDOS Monitor Wall is an add-on program for the VIDOS video management system.
PC on which VIDOS Monitor Wall is installed. Below you will find an example configuration to give you a starting point for calculating the requirements for your system: Example configuration: Pentium D (840) PC, 3.2 GHz, 1 GB RAM...
EN | 5 Additional documentation The VIDOS Monitor Wall program is installed on a PC that is connected via a network to a computer on which the VIDOS program is installed. Configuration is carried out using VIDOS and the Configuration Manager. The program is operated using VIDOS.
Installation and Operating Manual | VIDOS Monitor Wall VIDOS Monitor Wall VIDOS Monitor Wall is an easy to operate add-on program for the VIDOS video management system. VIDOS Monitor Wall is used to display video data on digital monitors, which are then treated as hardware monitors by the VIDOS system.
NTUI Installation The VIDOS Monitor Wall is typically installed on a PC on which none of the other programs from the VIDOS Pro Suite are installed. the Configuration Manager program is also automatically installed along with VIDOS Monitor Wall. The...
Installation and Operating Manual | VIDOS Monitor Wall Purchasing and entering a license In order to be able to use VIDOS Monitor Wall, you must purchase the corresponding license. This license is linked to the PC on which you install VIDOS Monitor Wall.
Page 13
4. Repeat this process to save the second Activation Key. After successful activation, you will find the corresponding entry in the License Viewer. You can now use VIDOS Monitor Wall on this PC. Note It is still possible to access the License Viewer after the demo version has expired.
Management toolbar: The network is browsed for devices that have an IP address; the PC on which VIDOS Monitor Wall is installed is thus found. A device of the type Vidos Monitor is displayed in the Network Scan window.
Page 15
Every VIDOS Monitor Wall installed on a network PC is now integrated into the VIDOS system. Setting up the monitor window layout 1. In the VIDOS system tree, double click on the icon for the desired VIDOS Monitor Wall. You will see two sub-entries, each with a hardware monitor icon.
Page 16
3. Right-click in the window to open the popup menu. 4. In the popup menu, select Layouts. Select the desired layout: If you are using VIDOS Monitor Wall on a double monitor, the layout is identical on both halves of the monitor.
Page 17
EN | 13 Establishing connections to the monitor windows Note If you are using VIDOS Monitor Wall on a double monitor, you should also drag Monitor 2 into the working area. 1. Right click in one of the monitor windows.
Page 18
Installation and Operating Manual | VIDOS Monitor Wall Monitor numbering for use with VIDOS IntuiKey In order to be able to use a VIDOS IntuiKey control panel to connect cameras to individual monitor windows in VIDOS Monitor Wall, you must assign the monitor windows unique numbers.
Page 19
VIDOS Monitor Wall uses two password levels. The service level represents the highest level of authorization. After entering the corresponding password, it enables you to use all the functions of VIDOS Monitor Wall and to change Bosch Security Systems | 2005-09 | V1.0...
The level user allows you to establish and terminate connections but does not allow access to the configuration. – The Unit access section controls the access to VIDOS Monitor Wall from VIDOS. Here, you can set which protocol and which HTTP port VIDOS will use to communicate with VIDOS Monitor Wall.
SYSTEM However, you can also integrate VIDOS Monitor Wall centrally, so that all clients in the VIDOS system can access it. In this case, you should use the Configuration Manager. Start any Configuration Manager in the system, connect it to the desired server and assign VIDOS Monitor Wall to the system, as...
Page 22
EN | 18 Installation and Operating Manual | VIDOS Monitor Wall Installation and Setup Bosch Security Systems | 2005-09 | V1.0...
EN | 20 Installation and Operating Manual | VIDOS Monitor Wall Service and support If you have any questions about the programs from the VIDOS Pro Suite, you can find further information on the Internet at: www.vidos.net Technical support is available from:...