Speciþ Cations; Setting Up The Digital Photo Frame - Polaroid Digital Photo Frame User Manual

SpeciÞ cations
Unit
Unit Size
Weight
Resolution
Brightness
Contrast Ratio
Card Type
Input
Auto Start Mode
Photo Playback Mode

Setting up the Digital Photo Frame

1. Plug the appropriate end of the AC adapter into a power outlet and the other end into the Digital Photo Frame.
2. After you've stored content on a fl ash media card (not included), insert the card into the proper slot (see page 2).
Connecting a USB Device to the Digital Photo Frame
1. The Digital Picture Frame has a built-in mini-USB port. If you would like to connect the USB device (such as a USB
fl ash drive) to the Digital Picture Frame with a full-size port, please use the USB Connection Cable" included with the
digital picture frame. This included cable has a male mini-size USB port and a female full-size USB port.
2. It is recommended that you turn off your USB device and the Digital Picture Frame before connecting the USB device.
3. This Digital Picture Frame cannot be connected to a computer.
NOTE: DO NOT TAKE THE MEMORY CARD OUT OF THE SLOT WHILE THE PICTURES ARE STILL PLAYING OR
WHEN THE POWER IS STILL ON. THIS COULD DAMAGE THE FRAME OR THE MEMORY CARD. ALWAYS
TURN THE POWER OFF BEFORE REMOVING THE MEMORY CARD.
SpeciÞ cations and Set Up
8" Digital Photo Frame
290mm x 220mm x 40mm
1.2 kg
800 x 480
300cd/m
2
300:1
SD, MMC, MS
Mini USB
Auto slide show (JPEG)
1. Rotate, zoom in
2. Auto slide show
3. Interval time setup
4. Transition setup