Changing The Engine Oil - Husqvarna EZ4824 Operator's Manual

Changing the Engine Oil

The engine oil should be changed for the first time
after 5-8 hours of operation. Thereafter, it should be
changed every 50 hours. The oil drain valve is located
on the left side of the unit, below the oil filter.
• Place the machine on a flat surface.
• Place a container under the engine where the oil
drain valve exits.
• Remove the valve cap.
• Allow the oil to run out into the container.
• Reinstall the oil drain valve cap.
• Replace the oil filter if necessary.
• fill with new engine oil in accordance with
Checking the Oil level.
• Start the engine. Run it for 3-5 minutes. Stop and
recheck the oil level.
lUBRICATION
The dipstick markings
8009-159
53
Husqvarna-