Setting Up The Tv Channel List; Auto Scan - RCA J22CE820 User Manual

Chapter 7: Using the TV's Features
Note : Some of these menu items can only be accessed using the Master Remote(KM38R01).

Setting up the TV Channel List

A master remote is needed to change the channel list.

Auto Scan

This function automatically finds all channels available through the Antenna or Cable and stores them in
memory as the channel list.
1. Press the MENU button on the master remote to
enter the on-screen menu and then press either the
Down or Up button to select the TV sub-menu.
2. Press the OK button to enter the sub-menu and
then press either the Down or Up button to select
Tuner Mode.
3. Press the Left or Right button to select either
Antenna or Cable.
4. Press the Down or Up button to select Channel
Scan.
5. Press the OK button to start the auto search.
The TV will begin memorizing all of the available
channels.
6. Press the MENU button at any time to exit the chan-
nel scan process.
7. Once the channel scan is complete the channels
found and recognized by the TV will be available for
viewing.
42
TV
Tuner Mode Cable F F G G
Channel Scan G G
Channel Skip
G G
Select Back
MENU
TV
Tuner Mode Cable F F G G
Channel Scan
G G
Channel Skip G G
ENTER Scan Select MENU Back
TV
Status:Scanning.. Cable
Analog Channels:1
Digital Channels:0
10%
Cancel
MENU
Chapter 7