Table of Contents
Advertisement
10
Other connections
Use / to select the setting you want.
3
• VOL.C OFF – This unit does not control the
volume of the flat screen TV.
• VOL.C ON – When this unit is switched to
one of the inputs that use the flat screen TV
(DVD, or another one of functions below),
the volume on the flat screen TV is muted
so only sound from this system is heard.
4
Assign any input source connected to the
flat screen TV to the corresponding input
number.
Use / to select the source (DVD, LN1/2/3
(LINE 1/2/3) or USB), then / to select the
input number.
This matches this unit's input source with a
numbered video input on the flat screen TV.
For example, select the LN1 PDP3, LN2 PDP3
or LN3 PDP3 setting if the video output of your
line component is connected to video input 3
on the flat screen TV. TVTN switches the flat
screen TV to its built-in tuner and NONE leaves
the flat screen TV input as is (no switching
takes place).
5
When you're finished, press ENTER.
Switching on the SR+ mode
1
Press SHIFT+SR+ on the remote.
Use / to select SR+ ON then press
2
ENTER.
To switch SR+ control off, select SR+ OFF.
• If you disconnect the SR+ cable or switch
the flat screen TV off while SR+ is on, the
SR+ ON setting remains.
• The SR+ setting is maintained even after
switching this system into standby then
back on. Automatic muting will be effective
when this system is switched on.
Note
1 The PDP5 input may be called 'PC Input' (or similar) on your flat screen TV.
38
En
1
Hide quick links:
Advertisement
Table of Contents
