Installing The Battery And A Microsdhc Card - Zte Valet Z665C User Manual

Table of Contents
Troubleshooting ............................................. 73
For Your Safety ............................................... 76
General Safety .................................................... 76
Radio Frequency (RF) Energy ............................... 77
FCC Compliance ................................................. 77
Using Your Phone with a Hearing Aid Device ....... 78
Road Safety ........................................................ 79
Product Handling ............................................... 79
Electrical Safety .................................................. 81
Interference ........................................................ 81
Explosive Environments ...................................... 82
Specifications ................................................. 83
Notes ............................................................... 84
4
Getting Started
Installing the Battery and a
microSDHC Card
Switch off your phone before installing or replacing the
battery. You have the option to install a microSDHC
card of up to 32GB to expand your phone's storage
capacity. The microSDHC card can be installed and
removed while the phone is turned on. Unmount the
microSDHC card before removing it.
1. Place your finger in the slot at the bottom of the
back cover to lift and remove the cover.
2. Insert the battery by aligning the metal contacts on
the battery with the gold contacts in the battery
compartment. Gently push down on the battery until it
clicks into place.
WARNING! Do not handle a damaged or leaking
Li-Ion battery as you can be burned.
3. Hold your microSDHC card with the metal contacts
facing down and slide it into the microSDHC card slot.
NOTE: Your phone may come with a pre-installed
microSDHC card. Some applications may not function
normally after you remove the card, pre-installed or
otherwise.
4. Press the cover gently back into place until you hear a
click.
5