Table of Contents
Advertisement
gt-435ximanual.qxp
1/17/2012
OPERATION
X/K Filter Modes
Recently, many new products operate on X or K band
causing nuisance alerts to radar detectors. Some of these
are radar based Traffic Monitoring Systems mounted to
poles alongside the highway and others are K Band Lane
Change Assistants and Blind Spot Detectors found on
some automobiles. The X/K Filter Mode offers multiple
levels of rejection to reduce false alerts caused by these
systems.
Ka Filter Modes
There are times when a radar detector in another vehicle,
can emit a frequency which can cause your detector to
falsely alert. The Ka Filter Modes allow you to select the
level needed for your area to minimize the occurrences of
these false alerts.
Filter Mode is the factory default setting and should
provide adequate filtering for most conditions. If you
experience excessive alerts due to radar detectors in other
vehicles, increase the Filter level. See Option Selection
Mode to change the filter settings.
Setting Saver
Setting Saver saves your personalized settings so that when the
detector is turned off and then on again, you do not have to
re-enter them.
3:21 PM
Page 19
16
OPERATION
Ka Narrow Mode
Many countries do not share the same Ka radar guns as the
USA. Having a radar detector that scans the complete Ka
band may not be necessary if your Country is only using one
or more of the following (34.0 or 34.3 GHz). See Option Select
Mode to engage Ka Narrow mode.
17
Advertisement
Table of Contents
