Hargray Entone User Manual

HARGRAY BROADBAND TV USER GUIDE
Entertainment Through Innovation
Entone

Remote Control

Important: Each of your remotes should be labeled 10, 12 or 23 by your installer. The numbers correspond
to the channel the TV must be tuned to. If your remotes are not labeled, Hargray recommends that you use a
sticker or colored label to keep the remote with the appropriate TV.
Your remote controls the set top box, your television set and,
optionally, an auxiliary device like a DVD player or VCR. Press
STB, TV or AUX to select the device you wish to operate.
Functions section by section:
1.
Turn TV On:
• Press TV, then POWER to turn the TV on or off.
• Press STB (Set Top Box), then change channels.
Note: If your TV screen displays instructions to press
then POWER, then press STB then POWER to activate system.
2.
Program Guide
INFO provides information about
selected program
MENU displays system menu to access features
GUIDE displays detailed program listings
EXIT returns to program or to previous menu
3.
Volume and Channel
VOL +/- adjusts volume on TV
CH / changes channel
LAST Return to last channel viewed
Note: If pressing the channel button causes your picture to
be snowy, use the number keys to enter the channel on your
remote's label (10, 12, or 23), then press STB and
begin to change channels.
4.
Navigation
to move on-screen highlights.
OK to select the highlighted option.
Move a page at a time in the program guide:
Page left
5.
Numeric Keypad Enter channels or other
numeric information at menu prompts.
MUTE silences TV volume
Note: Press VOL + to cancel MUTE.
6.
Features: Jump directly to main features
DTV Digital TV returns to normal viewing at
any time
MOVIES future release of Video on Demand
MUSIC 46 channels of commercial-free music
Note: Other buttons are not used.
Page right