Assembly & Set-Up - Cub Cadet CC 550ES Operator's Manual

Assembly & Set-Up
Contents of Carton
• One Lawn Mower
• One Lawn Mower Operator's Manual •
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up gasoline and oil as instructed in the Engine Operation
section of this manual BEFORE operating your mower.
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. Pull up and back on upper handle as shown in Figure
3-1. Do not crimp cable while lifting the handle up.
Remove star knobs from handle mounting brackets
and secure the lower handle onto the handle
brackets by placing the lower hole of the lower
handle onto the pins of the handle brackets.
b. Tighten star knobs securing upper handle to lower
handle. See Figure 3-1. Make sure that each carriage
bolt is seated properly in the handle.
B
Figure 3-1
• One Grass Catcher
One Engine Operator's Manual
A
B
• One Side Discharge Chute
• One Bottle of Oil
2. Tighten star knobs securing lower handle to handle
brackets. See Figure 3-2. Make certain the lower handle is
seated securely into the handle mounting brackets.
Figure 3-2
3. The rope guide is attached to the right side of the upper
handle. Loosen the wing nut which secures it to the upper
handle. Refer to Figure 3-3.
C
D
Figure 3-3
3
A
B
9