Battery Charging Instructions - Pharos iGPS-BT User Manual

III. Battery charging instructions
The Pharos Bluetooth Dock (BT Dock) for the GPS receiver includes a
rechargeable and replaceable Li-Polymer battery. The optional Power
Accessory Kit (PXT02), which contains a spare battery, battery charging
holder, and an AC battery charger can be purchased from Pharos.
Below are three common ways to charge the battery (and PDA).
A. Charging the battery in the car
adapter:
1. Charging both battery and PDA in the car simultaneously
Plug the DC plug (black) from the DC charging adapter into the DC
jack on the BT Dock (or the battery charging holder with the battery
loaded – PXT02) then make sure the car charger is plugged into the
car cigarette lighter jack (red LED is on) and is connected to the DC
charging adapter. When the LED indicator turns green, the battery is
fully charged.
Connect the DC plug (gray or beige) to the PDA (some PDAs require a
charging adapter which comes along with the PDA) to charge the PDA
simultaneously.
(or at home) with DC charging
8