Yamaha BRUIN YFM35FAV Owner's Manual page 119

3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended
type to raise it to the correct level.
CAUTION:
_
Be sure no foreign material enters the final
gear case.
_
4. Install the oil filler bolt, and then tighten it
to the specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
Replacing the final gear oil
1. Remove the final gear case cover by re-
moving the bolts.
1. Final gear case cover
2. Place the ATV on a level surface.
3. Place a container under the final gear
case to collect the used oil.
8-13
2. Bolt (× 2)