GE Monogram 49-60562-2 Owner's Manual page 18

Anti-tip Remove Grilles for Access to Anti-Tip Locking
Hooks
bracket
Fresh Food Unit
installation
• Open the access door.
(cont.)
• Remove the 4 screws from the grille.
• Pull the bottom of the grille forward, down
Freezer Unit
• Open the access door.
• Remove the 4 screws from the grille.
• Pull the bottom of the grille forward, down
Power Cord
Locate the power cord inside the left cavity.
If it has not been adjusted so the plug is easily
accessible, do so now.
Move Unit into Final Position
• Move refrigerator toward its final installed
• The unit has "L" bolts in the upper left and right
18
and out to remove.
and out to remove.
location. Align the tabs on the wall bracket
with the openings in the back of the unit.
corners inside of the access compartment.
These bolts will interlock with the wall bracket
and secure the unit using the washers and hair
pin cotters in the hardware kit once the unit has
been leveled and is in the final position.
Anti-Tip Bracket Installation
36" All-Refrigerator and All-Freezer Units