Install The Extender; Place The Extender And Power It On - NETGEAR WN3100RP Installation Manual

Install the Extender

Place the extender, apply power, and connect it to your WiFi network.

Place the Extender and Power It On

1. Place the extender halfway between your router and the location
that has poor WiFi coverage.
If it is not possible to place the extender at the halfway point,
move the extender closer to the location with poor coverage, but
still within the wireless range of the router.
2. Turn the On/Off switch on the side
of the extender to the On position.
3. Plug the extender into a power
outlet and wait 1 minute until the
extender starts.
The Power LED lights green.
On/Off
switch
4