Table of Contents
Advertisement
GENERAL SAFETY PRECAUTIONS
Locking screw
The locking screw secures the cutting attachment on the
output shaft.
Protect your hand from injury when assembling, use the
blade guard as protection when tightening with a socket
spanner.
When fitting, tighten the screw in the opposite direction to
the direction of rotation of the cutting attachment. To
remove it, undo the screw in the same direction as the
cutting attachment rotates. (CAUTION! The screw has a
left-hand thread.)
Tighten the screw using the socket spanner. 35-50 Nm
(3.5-5 kpm).
10 – English
Advertisement
Table of Contents
