HP 5120 SI Series Specification page 32

QuickSpecs
Accessory Product Details
HP RPS1600 Redundant
Power System (JG136A)
Ports
Physical characteristics
Environment
Electrical characteristics Voltage
Safety
Services
DA - 13795 Worldwide — Version 12 — November 12, 2013
8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)
Dimensions
Weight
Full configuration weight 16.75 lb. (7.6 kg)
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Current
Idle power
Maximum power rating
RPS power
PoE power
RPS
PoE
Frequency
Notes
CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart B; EU
RoHS Compliant; EN 60950-1/A11; C-Tick; VCCI Class A; ROHS Compliance; EN
300386
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5120 SI Switch Series
15.63(d) x 17.32(w) x 1.74(h) in. (39.7 x 44 x 4.42
cm)
14.11 lb. (6.4 kg)
14°F to 122°F (-10°C to 50°C)
5% to 95%
-40°F to 158°F (-40°C to 70°C)
5% to 95%
up to 13,123 ft. (4 km)
Pressure: 53 dB; ISO 7779, ISO 9296
100-120/200-240 VAC
30/60 A
38 W
3550 W
3200 W
2800 W
-55 V
-55 V
50/60 Hz
Idle power is the actual power consumption of the
device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
With one RPS1600 Power Supply, the PRS1600
Redundant Power System can provide 1600W
power output; With two PRS1600 Power Supplies,
the output power is 3200W.
www.hp.com/networking/services for details on
Page 32