Canon Powershot A75 User Manual page 31

Shooting Mode
Exposure Compensation
White Balance
Drive Mode
ISO Speed
Photo Effect
Light Metering Mode
Compression
Resolution
Postcard Print
Flash
Red-eye Reduction
Macro Mode
Manual Focus
Auto Rotate Function
Movie Recording Mode
Digital Zoom Setting*
Camera Shake Warning
Low Battery
*1 : The icons of all the SCN mode options appear (p. 51).
*2 : Zoom powers reflect the combined optical and digital zoom
effects. These figures appear when the digital zoom is activated.
When a Shooting mode setting is changed, the
settings appear on the LCD monitor for about 6
p. 38, 74
seconds even if the LCD monitor is set to No
information or off. (The Shooting mode settings
p. 80
may not appear depending on the camera
p. 81
setting.) You can set the flash, Macro mode, and
the manual focus settings while this information
p. 45, 47
appears on the LCD monitor.
p. 84
and the icons in the
p. 85
even when the information view is turned off.
In addition to the above, the AF frame, spot light
p. 79
metering frame, shutter speed, aperture value,
p. 40
recordable images or recordable movie time are
displayed as in the example to the left.
p. 40
Setting the mode dial to
p. 53
the LCD monitor on regardless of whether it is set
p. 42
to on or off.
A slow shutter speed has likely been selected
p. 43
because of insufficient lighting if the upper
p. 44
indicator beside the viewfinder blinks orange after
p. 89
the metering preparations are complete and the
camera shake icon (
p. 91
monitor. Set the flash to
p. 55
camera to a tripod to shoot.
2
p. 46
After you take a photo by fully pressing the
shutter button, the image displays on the LCD
p. 16
monitor for approximately two seconds (or the
p. 19
review duration you set from 2 to 10 seconds). If
you press the SET button while the image is
displayed, it will continue to display (p. 36).
Basic Functions
above appear
or modes turns
) displays in the LCD
or , or affix the
29