Casio AP-650M User Manual page 56

Connecting to a Computer
3.
While holding down the
button, press the
button.
This will enter the storage mode, which enables data
transfer with the connected computer. The
(FUNCTION) button lamp will flash and the display
will appear as shown below.
• To exit the storage mode at any time, press the
(FUNCTION) button. This is the only button
operation that is supported while the Digital Piano is
in the storage mode.
• You will not be able to enter the storage mode while
any one of the following operations is in progress.
Metronome, Auto Accompaniment, song playback,
recorder (on), Auto Accompaniment editing, Music
Preset editing, data transfer between the Digital
Piano and USB flash drive.
4.
If your computer is running Windows XP,
double-click "My Computer".
Under "Devices with Removable Storage", you should
be able to see a folder representing Digital Piano
memory or the USB flash drive loaded in the Digital
Piano.
* Windows Vista, Windows 7: Double-click "Computer".
Mac OS: Skip step 4 and double-click "PIANO" on
your Mac desktop.
E-54
cs (FUNCTION)
dr (USB DEVICE MODE)
cs
*
5.
Double-click "PIANO".
You now should see five data folders, one for each data
type.
6.
Referring to the table below, open the folder
cs
that corresponds to the type of data you want
to transfer.
To load this
type of data
User rhythms
(page E-18)
User songs
(page E-23)
User Music Presets
(page E-27)
Recorder songs
(page E-33)
Registration
(page E-31)
• Data types and contents are the same as those when
saving Digital Piano data to or loading it from a USB
Flash Drive. See "USB Flash Drive" (page E-45) for
more information.
Open this data
Data File Name
folder
BIDRHYnn.AC7
(nn: 01 to 10)
BIDRHYnn.Z00
RHYTHMAC
(nn: 01 to 10)
BIDRHYnn.CKF
(nn: 01 to 10)
BIDSNGnn.MID
(nn: 01 to 10)
(SMF Format 0 or
MUSICLIB Format 1)
BIDSNGnn.CM2
(nn: 01 to 10)
(CASIO format)
BIDMPSnn.MPS
MUSICPST
(nn: 01 to 50)
BIDRECnn.CSR
RECORDER
(nn: 01 to 05)
REGISTMR BIDREGAL.CR6