Control Panel And Knobs; Painted Surfaces; Vent; Porcelain Enamel Cooktop - GE JMS08 Owner's Manual

Care and cleaning of the range.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
Pull the knob straight off the stem.
10
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective
shipping film with your fingers and slowly
peel it from the appliance surface. Do
not use any sharp items to remove the
film. Remove all of the film before using
the appliance for the first time.
To assure no damage is done to the

Control Panel and Knobs

Clean up spatters with a damp cloth.
Remove heavier soil with warm,
soapy water.
Do not use abrasives of any kind on the control
panel.
The control knobs may be removed for easier
cleaning.
Make sure the knobs are in the OFF
Oven Vent
The oven is vented through an opening
under the right rear surface unit.

Porcelain Enamel Cooktop

The porcelain enamel finish is sturdy
but breakable if misused. This finish is
acid-resistant. However, any acidic foods
spilled (such as fruit juices, tomato or
vinegar) should not be permitted to
remain on the finish. If acids spill on the
cooktop while it is hot, use a dry paper
towel or cloth to wipe it up right away.

Painted Surfaces

Painted surfaces include the sides and
the drawer front.
Clean these with soap and water or
a vinegar and water solution.
Do not use commercial oven cleaners,

Stainless Steel Surfaces

Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
finish of the product, the safest way to
remove the adhesive from packaging tape
on new appliances is an application of a
household liquid dishwashing detergent.
Apply with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all
parts. It cannot be removed if it is baked on.
positions and pull them straight off the
stems for cleaning.
The knobs can be cleaned in a
dishwasher or they may also be washed
with soap and water. Make sure the insides
of the knobs are dry before replacing.
Replace the knobs in the OFF position
to ensure proper placement.
Never cover the opening with aluminum foil or
any other material.
When the surface has cooled, wash with
soap and water. Rinse well.
For other spills such as fat spatterings, wash
with soap and water or cleansing powders after
the surface has cooled. Rinse well. Polish with a
dry cloth.
cleaning powders, steel wool or harsh
abrasives on any painted surface.
(on some models)
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest you,
please call our toll-free number:
National Parts Center
1.800.626.2002
ge.com