Assemble Surface Burners; Seal The Openings - GE JGBS10 Owner's Manual & Installation Instructions

3 ELECTRICAL CONNECTIONS
B
Usage Situations where Appliance Power
Cord will be Disconnected Frequently.
Do not use an adapter plug in these situations
because disconnecting of the power cord places
undue strain on the adapter and leads to
eventual failure of the adapter ground terminal.
The customer should have the 2-prong wall
receptacle replaced with a three-prong
(grounding) receptacle by a qualified electrician
before using the appliance.
The installation of appliances designed for
mobile home installation must conform with
the Manufactured Home Construction and
Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile
Home Construction and Safety, Title 24, HUD,
Part 280) or, when such standard is not
applicable, the Standard for Manufactured
Home Installations, latest edition (Manufactured
Home Sites, Communities and Set-Ups), ANSI
A225.1, latest edition, or with local codes.
Electric Disconnect
• Locate disconnect plug on the range back.
• Pinch sides of connector and pull out of range
back.
4

SEAL THE OPENINGS

Seal any openings in the wall behind the range
and in the floor under the range when hookups
are completed.
Installation Instructions
(CONT.)
35

ASSEMBLE SURFACE BURNERS

5
A
Assemble the side burners as shown.
Side
Grate
Burner cap
Burner head
Electrode
B
Assemble the center burner. Make sure that
the locking feet on the center grate hook
over the side grates.
Center Grate
Locking
Foot
Burner head
and cap
assembly
CAUTION:
Do not operate the burner
without all burner parts in place.
Medium burner
Oval head and cap
head and cap
assembly
Front of range
Medium burner
head and cap
Place the burner heads and caps on the
cooktop. Make sure that the heads and caps
are placed in the correct locations. There is
one oval (center) head and cap assembly
and four medium (side) heads and caps.
Slot
Electrode
Make sure the slot in the burner head is
positioned over the electrode.
Locking
Foot
Electrode
Medium burner
head and cap
Medium burner
head and cap
Slot