Removable Broiler Drawer; Storage Drawer - GE JGBS02EM Use And Care & Installation Manual

Removable Storage Drawer
The storage drawer is a good place to store cookware
and bakeware. Do not store plastics and flammable
material in the drawer.
Do not overload the storage drawer. If the drawer is
too heavy, it may slip off the track when opened.
The storage drawer may be removed for cleaning
under the range. Clean the storage drawer with a
damp cloth or sponge. Never use harsh abrasives or
scouring pads.
To remove storage drawer:
1. Pull the drawer straight out until it stops.
2. Lift the drawer until it stops on the drawer clear
stops on the range.
3. Again pull the drawer out until it hits the second set
of stops.
4. Tilt the front of the drawer up and free of range.

Removable Broiler Drawer

To remove:
1. When the broiler is cool, remove rack and pan.
2. Pull the broiler drawer out until it stops, then push
it back in about 1 inch.
3. Grasp handle, lift and pull broiler drawer out.
Clean the broiler drawer with hot soapy water.
Removable Kick Panel
The kick panel may be removed for cleaning under
the range.
To remove, lift up bottom
of panel slightly to
disengage the panel from
the panel forward until
spring clips are released at
top of panel.
Air Adjustment Shutter(s) for Oven Burner(s)
The air adjustment shutter(s) for the oven burner(s) regulates the flow of air
to the flames.
The location of the air adjustment shutter(s) depends on whether your oven
has a single bottom burner or two separate burners—a top burner for
broiling and a bottom burner for normal baking. See Installation Section of
this book for instructions for location and proper adjustment of shutters.
(on some models)
(on some models)
(on some models)
,/
To replace storage drawer:
1. Set the stops on the back of the drawer over the
stops in the range.
2. Slide the drawer evenly and straight back, so that
the rails in the range are engaged.
3. Push the drawer back until second stops on drawer
hit the stops in the range. Tilt the drawer up and
over these.
4. Slide the drawer in the rest of the way.
To replace, insert the
2 slots at bottom of
panel onto the 2 tabs
at base of the range
and push the top of
panel forward to
engage spring clips.
drawer in the raised
position as you slide it
partway into the
range. Then lower the
27