Sanyo Xacti VPC-S70EX Instruction Manual page 31

4
Release your finger from the shutter button.
h The captured image is recorded.
HINT
When the focus mode (page 59) is set
to the 9-point focus mode B...
i A target mark & on the monitor shows
the area the camera is focusing on.
i The camera automatically determines
the correct focus by measuring from 9
different focus points within the
shooting area. If the target mark is at a
position that is different from the point
you wish to focus on, you can refocus,
for example, by changing the shooting
angle.
i The large target mark appears when
the camera focuses on a wide area in
the center of the screen.
About the focus indicator
i A green focus indicator appears when
the subject is successfully focused, or
a red focus indicator when the camera
was not able to focus the subject.
The shutter speed and aperture are
displayed
i The shutter speed and aperture
settings are also displayed on the
monitor. You can use them as a
reference when shooting.
If the motion alert icon appears...
i During still image shooting, if the
shutter speed is slow and the
possibility that the image may be
blurred due to camera shake becomes
high, the motion alert icon may appear
on the monitor. In this case, use a
tripod to stabilize the camera when
shooting, or set the flash operation
mode to automatic (page 47).
i When shooting with the fireworks ^
scene function, the motion alert icon
always appears, but this is normal.
Focus indicator
Target mark
F3.1
1/40
Shutter speed
Aperture
Motion alert icon
F3.1
1/4
English
28