Tp Alarm Function - Pioneer DEH-P90DAB Operation Manual

Using the DAB Functions
7 Canceling Road Traffic Flash and Transport Flash interruptions part way through
• To cancel a Road Traffic Flash or Transport Flash interruption and return to
the original source, press the TA button during an Announcement interruption.
Note:
• You can also switch in order between interrupting Announcements. (Refer to "Switching
Interrupting Announcements" on the next page.)

TP Alarm Function

When the following conditions arise, the "TRFC
seconds, the TP Alarm beeps for 10 seconds, reminding you to select a Service Component
supporting Road Traffic Flash and Transport Flash.
• When Road Traffic Flash and Transport Flash interruption setting is ON.
• When the Service Follow Function is ON.
• When this unit (during DAB reception) cannot clearly receive a Service Component
supporting Road Traffic Flash and Transport Flash.
• When this unit RDS cannot receive a TP or enhanced other network's TP station broad-
cast.
• When listening to a DAB broadcast, after hearing the TP Alarm, you should
re-tune to a Service that supports Road Traffic Flash and Transport Flash if
you want to continue the possibility to receive them.
When listening to any other sources, 30 seconds after the "TRFC
search automatically starts for a Service Component in that area that supports Road Traffic
Flash and Transport Flash.
37
2
" indicator turns to "T", and after 30
2
" indicator turns to "T",