Epson Stylus COLOR 440 Setup And Daily Use page 19

Installing in Windows 95, 98, and NT 4.0
1. Insert the printer software CD shipped with your printer in
the CD-ROM drive. The Installer dialog box appears. (For
floppy disk users, insert the disk in a disk drive, then double-
click the FD drive icon and double-click the Setup.exe icon.)
2. Click Install to start the printer software installation.
3. When the installation is complete, click OK .
Note:
If the New Hardware Found screen or any other Wizard appears
when you turn on your computer, click Cancel and follow the steps
above.
Installation time varies depending on your computer.
For information on opening and using the software, see "Printing
Your First Page" on page 20. See also "Using the Printer Software"
in the online Reference Guide.
If you use your printer on a network with Windows 95, 98, or NT
4.0, see "Network Printing" in the online Reference Guide.
Installing in Windows 3.1
Follow these steps to install the software in Windows 3.1:
1. Make sure Windows 3.1 is running and the Program Manager
window is open.
2. Insert the printer software CD shipped with your printer in
the CD-ROM drive. (If you use the floppy disk version, insert
it in a disk drive.)
16