Epson Stylus Photo 1270 Setup Manual page 15

4. To change the printer driver settings, open the File menu and click Print.
A Print dialog box similar to the one below opens. (This example is from
Paint).
5. Make sure your printer is selected in the Name list box, then click
Properties. The printer driver opens.
6. Click the Main tab, then click anywhere in the Media Type box and
select Photo Quality Ink Jet Paper.
7. Select Color as the Ink setting.
8. Make sure Automatic is selected as the Mode setting.
When Automatic is selected, the printer software optimizes other
settings according to the Media Type and Ink settings you make.
9. Click the Paper tab, then click anywhere in the Paper Size box and select
the paper size you loaded in the printer.
10. Click OK at the bottom of the driver. You return to the Print dialog box
(or a similar dialog box).
11. Click Close, OK, or Print to print. You may need to click a combination
of these buttons.
While printing, the EPSON Progress Meter will appear, showing the
printing progress and the status of your printer.