Appendix; Troubleshooting - Pioneer AVIC-X1R Hardware Manual

MAN-AVIC-X1R-EN.book Page 19 Wednesday, May 4, 2005 4:45 PM

Appendix

Troubleshooting

About troubleshooting other than description
below Appendix of the Operation Manual
Symptom Cause
There's no picture. The handbrake cord is not connected.
The handbrake is not applied.
The operation is prohibited for the disc.
The icon is
displayed, and
The operation is not compatible with the
operation is not
disc's organization.
possible.
The picture stops Reading of data has become impossible
(pauses) and the unit during playback.
cannot be operated.
The picture is The aspect setting is incorrect for the
stretched, the aspect is display.
incorrect.
Rear display picture • The source disc being listened to with the
disappears. product has been ejected.
• The disc without a video source is
playbacked.
• The REAR button was pressed and REAR
ON mode switched off.
• There was a problem with the rear display
or a faulty wiring connection, for example.
• Rear View is selected on the screen.
• When the gearstick is in [R], displays rear
view camera images. (When "NAVI" is
selected in REAR DISP menu.)
Nothing is displayed The setting for the rear view camera is
and the touch panel incorrect.
keys cannot use. The gearstick was placed in [R] when the
rear view camera was not connected.
LCD Panel knocking Incorrect setting of angle.
against your vehicle's
console or dashboard.
Video image appears This happens when videos are viewed in
grainy. CINEMA or ZOOM mode.
Action (See)
Connect a handbrake cord, and apply the
handbrake.
Connect a handbrake cord, and apply the
handbrake.
This operation is not possible.
This operation is not possible.
After pressing 7 once, start playback once
more.
Select the appropriate setting for your
display. (Page 15)
• Before ejecting the disc, switch the
source.
• Switch the source with a video source.
• Press the REAR button to turn REAR ON
mode on.
• Check the rear display and its connection.
• Select view mode other than Rear View.
• Select SOURCE in REAR DISP menu.(or
when you move the shift lever other than
[R] position, the screen will be returned to
the previous display.)
Connect a rear view camera correctly.
Press NAVI/AV button to return to the
source display and then select the correct
setting for CAMERA.
About CAMERA setting Operation
Manual
Press ANGLE (+/–) to adjust the LCD
angle. Forcibly adjusting the LCD panel by
hand may damage it.
Select a different mode to view videos.
19