Table of Contents
Advertisement
Connecting the Units
When using a display connected video outputs
WARNING
NEVER install the display in a location that enables the Driver to watch the DVD or Video CD
while Driving.
Display with
RCA input jacks
To video input
Video output
1.5 m
RCA cable
(supplied)
This product
<ENGLISH>
When connecting with a rear view camera
When using this product with a rear view camera, automatic switching to video from a rear
view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
•
The screen image may appear reversed.
•
The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a
tight parking spot. Do not use this function for entertainment purposes.
•
The object in rear view may appear closer or more distant than in reality.
RCA cable
To video output
(sold separately)
Rear view camera
CAUTION
Video input
You must use a camera
which outputs mirror
reversed images.
This product
Violet/white
Of the two lead wires connected to the back lamp, connect the one in
which the voltage changes when the gear shift is in the REVERSE (R)
position. This connection enables the unit to sense whether the car is
moving forwards or back wards.
Extension lead (supplied)
15 cm
8 m
Fuse resistor
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed
pliers.
Note:
It is necessary to set V.IN to CAMRA in initial settings when connecting the rear view camera.
Advertisement
Table of Contents
