Model:
TBB-24-48
STANDARD FEATURES
DESIGN
•
True's refrigerated back bar coolers are
designed with enduring quality and
value. Our commitment to using the
highest quality materials and oversized
refrigeration assures colder product
temperatures and years of trouble free
service.
REFRIGERATION SYSTEM
•
Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
•
Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains cabinet
temperatures of 33°F to 38°F (.5°C to
3.3°C).
•
Sealed, cast iron, self-lubricating
evaporator fan motor(s) and larger fan
blades give True back bar coolers a more
efficient low velocity, high volume airflow
design. This unique design ensures faster
temperature pull down of warm product,
colder holding temperatures and faster
recovery in high use situations.
•
Condensing unit accessed from behind
front grill, slides out for easy cleaning and
maintenance.
CABINET CONSTRUCTION
•
Exterior - heavy duty, wear resistant
laminated black vinyl front and sides.
Matching black aluminum back. All
stainless steel counter top.
PLAN VIEW
WARRANTY
Three year warranty on all parts
and labor and an additional 2
year warranty on compressor.
(U.S.A. only)
2001 East Terra Lane • O'Fallon, Missouri 63366 • (636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
Underbar Refrigeration:
Solid Swing Door 24" Back Bar Cooler
•
Interior - Stainless steel floor with 1/2"
(13 mm) reinforced lip and heavy gauge
galvanized steel walls.
•
Door threshold protector prevents
damage to cabinet from routine loading
of product.
•
Insulation - entire cabinet structure and
solid doors are foamed-in-place using
Ecomate. A high density, polyurethane
insulation that has zero ozone depletion
potential (ODP) and zero global warming
potential (GWP).
•
Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
DOORS
•
Wear-resistant laminated black vinyl
exterior with heavy gauge galvanized
steel liner.
•
Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to ensure
permanent attachment.
•
Positive seal doors.
•
Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
•
Door locks standard.
SHELVING
•
Four (4) adjustable, heavy duty, black PVC
coated wire shelves 17 3/4"L x 18"D (451
mm x 458 mm). Four (4) chrome plated
shelf clips included per shelf.
•
Aluminum shelf support pilasters. Shelves
are adjustable on 1/2" (13 mm) increments.
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
TRUE FOOD SERVICE EQUIPMENT
LIGHTING
•
Fluorescent interior lighting. Safety
shielded.
MODEL FEATURES
•
Evaporator is epoxy coated to eliminate
the potential of corrosion.
•
Designed to accommodate a variety of
beer kegs.
•
Listed under NSF-7 for the storage and/or
display of packaged or bottled product.
ELECTRICAL
•
Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase, 15 amp dedicated outlet. Cord and
plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/flanged legs.
❑ 2 1/2" (64 mm) diameter castors.
❑ 4" (102 mm) diameter castors.
❑ Additional shelves.
❑ TrueTrac one liter or wine bottle
organizers.
❑ TrueTrac 12 oz. (355 ml) bottle organizers.
❑ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve and
requires R404A refrigerant). Consult
factory technical service department for
BTU information. All remote units must be
hard wired during installation.
Model
Elevation Right
KCL
TBB-24-48
TFJX35E
Plan
3D
Back
TFJX35S
TFJX35P
TFJX353