Sunbeam FoodSaver VAC440 Instruction Booklet page 11

How to Vacuum Package using FoodSaver
Bottle Stoppers and Deli Containers - Continued
4. Place the container adaptor over the grey
vacuum valve on the container lid.
See figure 4.
5. To begin the vacuum process, press
down firmly on corners of the lid of your
FoodSaver ® appliance until the side
latches click.
6. Press the Canister Vacuum Button.
7. When the Indicator lights and motor turns
off, the vacuum process is complete.
8. To remove accessory hose, gently twist
and remove hose from the appliance and
container. Unlock side latches.
ImPOrTanT: After vacuum packaging, put deli
container in refrigerator or freezer. Allow hot
foods to cool to room temperature before
vacuum packaging. Otherwise, the contents
may bubble up out the container.
How to Open the FoodSaver
To open, press and hold down the grey rubber
button in the centre of the lid. This will
release the vacuum – a hissing sound can be
heard as the air rushes in.
How to Remove the FoodSaver
To remove, simply twist and pull up on the
Bottle Stopper to release the vacuum.
How to Open FoodSaver
To open, lift the grey rubber cover in the
centre of the lid. This will release the
vacuum – a hissing sound can be heard as
the air rushes is.
Figure 4
*FoodSaver
ImPOrTanT: Remember to remove the
Accessory Hose from the Accessory Port on
the appliance before you vacuum package in
FoodSaver
Canisters,
®
® Canister
®
® Deli containers
® Deli containers sold separately.
®
Bags.
Bottle Stopper
11