Table of Contents
Advertisement
Quick Links
20kVA Rackmount/Tower Isolation Transformer
Introduction
Important Safety Warnings
Features
Horizontal Rack Mounting
Connection
Storage & Service
Warranty & Warranty Registration
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Owner's Manual
SU20KXFMRT4U
Copyright © 2013 Tripp Lite. All rights reserved.
1
2
2
3
4
5
7
7
Advertisement
Table of Contents
Related Manuals for Tripp Lite SU20KXFMRT4U
Summary of Contents for Tripp Lite SU20KXFMRT4U
- Page 1 Owner’s Manual SU20KXFMRT4U 20kVA Rackmount/Tower Isolation Transformer Introduction Important Safety Warnings Features Horizontal Rack Mounting Connection Storage & Service Warranty & Warranty Registration 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2013 Tripp Lite. All rights reserved.
-
Page 2: Important Safety Warnings
Important Safety Warnings SAVE THESE INSTRUCTIONS. This manual contains important instructions and warnings that should be followed during the installation and maintenance of all Tripp Lite transformers. Location Warnings • Install your transformer indoors, away from excess moisture or heat, direct sunlight, dust and conductive contaminants. -
Page 3: Features
Features Circuit Breaker AC Input Voltage Selection Terminal Block Main Terminal Block (AC Input/Output of the Unit) Lifting Handles Conduit Landing and Wiring Access Box Redundant Ventilation Fans Rear View Front View... -
Page 4: Horizontal Rack Mounting
Horizontal Rack Mounting Note: Use the following mounting instructions with standard UPS Power Module rack enclosures and 4-post open frame racks only. Due to the weight of the transformer, it must only be placed/mounted in the lower portion of the rack. UPS Power Module It is important to note that in order to accommodate paralleling applications, equipment must be mounted in order of weight,... -
Page 5: Connection
Typical Input Max Rated Typical Output Models (Bundles) (L-L) Input Current OCPD** Wire Size Output Current Wire Size SU20KXFMRT4U 208V 100A #3 AWG #4 AWG 240V 100A #3 AWG #4 AWG * Input/Output – hardwired. ** OCPD – Overcurrent protective device. - Page 6 Connection continued Connect the hardwired input/output AC power connections located on the PDU. The AC input cord attaches to the facility’s LINE IN AC source while the AC output cord connects to the intended equipment. L1 IN (TO TERM. 4) 120V LINE OUT GROUND IN (TO TERM.
-
Page 7: Storage And Service
10 days of purchase. The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output receptacles. - Page 8 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 13-05-276 • 93-32BF_revA...